Basic Info.
Application
Automatic Doors, LED Products, Audio / Video Players
Signal Transmission
RF Remote Control
Transmission Distance
<50m
Voltage
DC5V, 12V~24voptional
Output
3 CMOS Open Drain Output
Output Current
<4A(Each Circuit)
Connection Mode
Common Anode
Static Power Consumption
<1W
Product Description
Basic Info
Place of origin: | Shenzhen,China |
output: | 3 CMOS Open drain Output |
output current: | <4A(each circuit) |
Output Power: | 5V:<60W, 12V:<144W, 24V:<288W |
Package sizes: | 135*80*55mm |
Connection mode: | Common anode |
Net weight: | 180g |
Supply Voltage: | DC5V, 12V~24VOptional(pls specify the required voltage on orders) |
Product Description
The controller is adopted 8 digital tube to show the modes of time and work. It adopts PWM dimmer electric.It matches the precise clock clip which can control the brightness and darkness of the light according to the time .When present time is same as the predicted time , the light will change as previous brightness. You can set 5 scenes during the 24 hours one day. By optional sensor, the controller can autocatalytically adjust the brightness fo the light according to the brightness and darkness of the environment optical line.The controller can be used for the normal one.The controller works through the infrared remote controller, and operate easily.
Technical Parameters:
Supply voltage:DC12~24V
Output:3 circuit
Output current:4A/ch
controller size:L122xW71×H25mm
package size:L135×W80×H55mm
Net weight:180g
Gross weight:210g
Static consumption:<0.24W
Output power:12V≤144W;24V≤288W
PWM signal class:256 level
PWM signal frequency:325HZ
Remote Control distance:>10M
Time deviation:<5 seconds per month
Direction for use:
Time set
The controller is inputted precise time control chip.It can work precisely when you set the time. Before time setting you should referent the local time.After setting, the controller can restore automatically,and with the power off memory function.
1.when the controller is on, press the key of Time set one time,the digital tube will be flash.The left 2 number is for hour, the right 2 number is minute .if the number is flashing that this parameters can be changed by the key of plus and minus.
2.Change the parameters though the key of plus and minus
to make the time is the same as present time.(You had better set 1 minute faster than the present time , because you need time to set the other parameters)
3.When you set well,press he key "Time set"again.shinning digital tube will be changed to the 2 number of hour.
4.Change the parameter by the key of plus and minus,
5.to make the number is the same as the present hour.
6.After setting the hour and minute,press the power key to restore the data. The digital tube will be standby mode when you set out.The right 5 number of the digital dedicated the time. The time start to work after setting the hour and minute, the second starts from 0.
Time control function:
Time control function is similar with the clock function. When the time of the present and set time are the same, the controller will change the brightness as you set. When cut off the power, this data will not be lost.
In time control mode, the digital tube of the last left one is 2 that show the controller is under the time control mode and will change the light according to the time. If the left number is not 2, you can press the key to change it to be 2.The controller can set 5 scenes, each scene is including 2 parts of parameters:time and brightness:time and brightness.The way to set the scene:
1.when the controller is on,press the key one time,the digital tube will be flash, there are three parts of it.The left one is the number of the scene(the number is between 1-5),the middle 2 number is hour, the right 2 is minute.
2.Dedication shine parameter can be changed by plus and minus key
3.Press the Scene set again, shinning digital tube will be change d, you can change the parameter, the hour range is 0-24(when you set 24 hour is not available),the minute range is 0-59.
4.The brightness plus and minus key of the controller or the brightness hot key to change the brightness, the present brightness is the present scene brightness, you can choose the brightness from 0-100%.
5.All the parameters are settled; press the power key to save the date ,the digital tube will be standby mode when set out.When the setting suitable, press the key ,the parameter will recover the parameters.
Light controlled function:
When the controller is on, press the light key ,the first number of the digital tube is 1 that is the controller is under the light control mode, At the same time controller can change the darkness and brightness according to the environment optical line.
The environment optical line is dark the light will be bright, when the environment optical line is bright will be dark. When the controller leave the factory you can optical line sensitivity of the induce.
The environment of high light intensity fluctuations, in order to prevent the light change its brightness with the light fluctuations, we had set 5 minutes for the light sensor adapt time, it means that when testing the light sensor function, the effect will not be seen until 5 minutes.
Brightness adjust function:
When the controller is on, press the brightness hot key on the controller to enter the light adjust mode. When the first number fo the digital tube is 0 that is the controller can change the light according to settled brightness.
With power off memory function. When re-connect to the power supply, it will be the statue that you set before cutting the power supply supply automatically.
Packaging&Shipping:
Our Services
1.Your inquiry related to our products or prices will be replied in 24hrs.
2.Well-trained and experienced staffs to answer all your enquires in fluent English.
3.OEM&ODM, any your customized lightings we can help you to design and put into product.
4.Distributoership are offered for your unique design and some our current models.
5.Protection of your sales area, ideas of design and all your private information.
Address:
5th Floor, Building B, Sanhe Industrial Park, Yingrenshi Community, Shiyan Town, Bao′an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Lights & Lighting
Company Introduction:
With advantage of many years producing LED in large scale as well as advanced technicians in lamp manufacturing field. LYD entered into the lamp market which uses LED as its lamp-house, as a high-tech enterprise which specialize in producing out door&indoor decorative lighting products.
Our company′s main products are: Book Lights, Flexible LED Strips, Rigid LED Strips, LED Module, LED Controller, Power Supply. Our products have been widely used in illumination, advertisement, city enlightening projects, traffic lamp, decorating, electronic gifts and toys, and many other production fields.
Our company supplies different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
Through persevering efforts, we have become one of the largest suppliers in LED light field in China and also won the trust of our customers because of excellent quality and prompt delivery.
Choosing louita means choosing satisfaction and choosing benefit! We firmly believe "Technology changes the world and the world will be more brilliant because of louita"